To improve your shopping experience today and in the future, this site uses cookies.
I Accept Cookies
A high quality erroding antifoul for slower moving vessles. Ideally suited to sailing boats and cruisers that require season-long performance. 
A high quality erroding antifoul for slower moving vessles. Ideally suited to sailing boats and cruisers that require season-long performance. 
International

International Boatguard 100 - 2.5 Litre

£75.00 £75.50 0% off
Earn
in Customer Rewards when you buy this item today
Pre-Order

With Pre-Order, you can purchase the latest items added to our store in advance of them arriving with us.

Your Pre-Order is prioritised (at no additional charge); meaning that as soon as the product arrives with us, we can wrap it straight back up; ready for collection via Click & Collect or despatch to you — it often never even hits the stock room shelves!

Pre-Launch

With Pre-Launch, the date when we expect to receive the product ourselves is still a little too hazy to be confident in accepting Pre-Orders.

So, instead, you can submit your email address against the item you are interested in and we will email you as soon as stock arrives on the system.

Estimated Delivery & Collection Dates

Estimated Delivery & Collection Dates are given on Pre-Order and Pre-Launch products. They are for indication purposes only and can change at any time without notice.

The dates we provide are based on indications given by our suppliers. Whenever we get updated information from our suppliers we will endeavour to update the Estimated Delivery & Collection Dates provided on product pages.

We estimate this will be ready for despatch to you or collection via Click & Collect on Undetermined
Earn Rewards
When you purchase this item, you will earn of rewards points to spend on your next purchase from us. You can spend your Rewards balance in-store & online.

Hassle free returns

Returns and exchanges


If you are not completely satisfied with your purchase, simply return the item or items to us in their original condition* within 30 days of receipt. You must notify us in writing within 14 working days, by post or email of your intention to do this.

We will issue a refund or exchange the item for a different size / colour if preferred. Delivery charges are only refundable if you have canceled your entire order within the 7 day Cooling-Off Period or where the goods are faulty and a refund is made.

Where you require an exchange, for example, because a size has been incorrectly ordered or you have changed your mind, we will make a small charge to cover re-delivery costs.

Payment for this must be provided before we will send out the replacement item.

For European and International orders the charge will vary depending on the current cost of delivery to that country. For an accurate price, please contact us before returning your item. sales@yachtshop.co.uk

Sorry, but we cannot accept returns of custom items, boats over four meters in length, engines more than 20hp, cut lengths of hose, chain or rope.

Please note :

·The item is your responsibility until it reaches us. For your own protection, we recommend that you send the parcel using a delivery service that insures you for the value of the goods.

·The cost of returning the item to us is your responsibility.

·The return can take up to 7 working days to be processed once received.

* Note: when trying on items of clothing, please ensure that you are not wearing perfume / aftershave or a deodorant which may leave a scent or marks on the item. The item(s) must be returned in its original packaging with all labels and tags and with all enclosed documentation.

We will be unable to accept the return of any item where there is evidence that these instructions have not been followed.

For large items such as outboard engines or tenders we reserve the right to charge a re-stocking fee of 10% to cover our administration and re-selling costs.

NEW BOATS - R.I.B's such as Highfield and Humber products including outboard engines over 20hp are not covered by the easy returns policy. All boats over four meters and engines over 20hp must be returned to us for inspection of any faults.

Faulty Item


If the item you received is faulty, please contact us quoting your order number, your name and address, details of the product and the reason for return, and whether you require a refund or a replacement. We will then advise on how to proceed with the return. You have 30 days from receipt of the faulty item to notify us of your intent to return it and a further 10 days in which to do so.

New boats that have, or establish faults will be fixed at no cost to the customer as part of the break-in / handover period (snagging) or be covered under the warranty of the particular item. All boats over four meters and engines over 20hp must be returned to us for inspection of any faults.

Incorrect Item


If the item you received is not what you originally ordered, please contact us quoting your order number, your name and address, details of the product and the reason for return, and whether you require a refund or a replacement. We will then advise on how to proceed with the return.

All refunds will be given as soon as possible, and usually take the form of a refund transaction using the same method used for the original purchase. This normally happens within 48 hours but at the very latest we will refund your money within 14 days from the day we receive your returned item. In the case of incorrect ordering and undisclosed reasons for return, a credit or exchange may be issued and the customer will be expected to pay the return postage costs.

All returns must be accompanied by a completed returns form.

You can download the returns form at the top of this page:

International Boatguard 100 - 2.5 Litre

Season:Current Year

Brand:International

Code:BOATGUARD1002.5L

Boatguard 100 is an antifouling product effective against fouling organisms; slime, aquatic plants and animals. A Polishing Antifouling suitable for professional and consumer application onto vessels in fresh and salt water. Provides protection for up to one year. Can be applied up to 6 months before launch

PRODUCT INFORMATION

Colour YBP000Dover White, YBP001Red,YBP002Blue,YBP003Navy,YBP004Black

Finish Matt

Specific Gravity 1.5 g/kg average

Volume Solids 51% average

Typical Shelf Life 2 yrs

VOC (As Supplied) 427 g/lt average

VOC (EU Solvent) 286g/kg average EU Solvent Emissions Directive (Council Directive 1999/13/EC)

Unit Size 2.5 Lt,

Technical Information
 

DRYING/OVERCOATING INFORMATION

Immersion Touch Dry

Overcoated By

Boatguard 100

APPLICATION AND USE

Preparation

Hints

Some Important Points

Compatibility/Substrates

Number of Coats

Drying

5°C (41°F)

8 hrs 1 hrs

15°C (59°F)

6 hrs 45 mins

23°C (73°F)

4 hrs 30 mins

35°C (95°F)

4 hrs 20 mins

35°C (95°F)
Min Max

4 hrs ext

page1image18368page1image18528page1image18952

Note: Note: Max. Immersion Times are as follows: 5­35°C ­ 6 mths
If lifting in straps minimum immersion times are as follows: 5°C ­ 24hrs, 15°C ­ 10hrs

5°C (41°F)
Min Max

16 hrs ext

15°C (59°F)
Min Max

10 hrs ext

23°C (73°F)
Min Max

6 hrs ext

Overcoating Substrate Temperature

page1image24208page1image24368page1image24792

PREVIOUSLY ANTIFOULED SURFACE
In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80­120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
In Poor Condition: Use Interstrip to remove all traces of antifouling.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE GRP: Prime with Gelshield 200 for osmosis protection, or Primocon
STEEL/IRON/LEAD/WOOD: Prime with Interprotect or Primocon.

Mixing: Thoroughly stir until product is mixed to a uniform consistency before use.
Thinning: Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied.
Cleaner: YTA085 International Antifouling Thinners #3.
Ventilation and Humidity Control: Ensure adequate ventilation during use.
Other: Antifoulings should only be wet sanded. Never dry sand or burn­off old antifoulings. True colour will develop after immersion.

To prevent premature failure, ensure correct amount of paint is applied using the coverage as a guide. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Substrate temperature should be 3°C/5°F above dew point and maximum 35°C/95°F.

Suitable for use on GRP, wood, steel/iron and lead. Not suitable for use over Aluminium/Alloy substrates or zinc sprayed surfaces.
Can be applied direct over most types of antifoulings, provided they are in sound condition, with the excpetion of VC17m/PTFE antifoulings. Consult your local International Paint representative for specific overcoating advice if you are unsure about compatibility of Boatguard 100 over your existing coating scheme.

By Brush/Roller:
Apply 2 coats of 50 microns dry for one season (Total DFT of 100 microns)

By Spray:
Apply 1 coat of 100 microns dry for one season (Total DFT of 100 microns)

page1image41256page1image41416

Please refer to your local representative or visit www.yachtpaint.com for further information.

In all schemes, apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and

page1image43632

All trademarks mentioned in this publication are owned by, or licensed to, the AkzoNobel group of companies. © AkzoNobel 2015.

page1image45000

Coverage

Ref:10464 Boatguard 100

any leading edges.

By Brush/Roller:
Issue Date:09/05/2(0T17heoretical) – 10m2/L per coat

(Practical) – 9m2/L per coat

By Spray: (Professional only) (Theoretical) – 5m2/L per coat (Practical) – 3m2/L per coat

Compatibility/Substrates

Boatguard 100

Suitable for use on GRP, wood, steel/iron and lead. Not suitable for use over Aluminium/Alloy substrates or zinc sprayed surfaces.
Can be applied direct over most types of antifoulings, provided they are in sound condition, with the excpetion of VC17m/PTFE antifoulings. Consult your local International Paint representative for specific overcoating advice if you are unsure about compatibility of Boatguard 100 over your existing coating scheme.

By Brush/Roller:
Apply 2 coats of 50 microns dry for one season (Total DFT of 100 microns)

page2image5680

Number of Coats

AntifoulingPolishing Antifouling

Coverage

Recommended DFT per coat Recommended WFT per coat Application Methods

By Spray:
Apply 1 coat of 100 microns dry for one season (Total DFT of 100 microns)

In all schemes, apply an extra stripe coat in areas of high wear such as chines, rudders, sterngear and any leading edges.

By Brush/Roller: (Theoretical) – 10m2/L per coat (Practical) – 9m2/L per coat

By Spray: (Professional only) (Theoretical) – 5m2/L per coat (Practical) – 3m2/L per coat

50 microns dry by brush/roller
100 microns dry per coat by spray

98 microns wet by brush/roller
196 microns wet by spray per coat

Airless Spray (Professional only), Brush, Roller

TRANSPORTATION, STORAGE AND SAFETY INFORMATION

Storage

Safety

IMPORTANT NOTES

GENERAL INFORMATION:

Exposure to air and extremes of temperature should be avoided. For the full shelf life of Boatguard 100 to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.

TRANSPORTATION:

This product should be kept in securely closed containers during transport and storage.

GENERAL:

Contains biocides.
Antifoulings should only be wet sanded. Never dry sand or burn­off old antifoulings.
Read the label safety section for Health and Safety Information, also available from our Technical Help Line.

DISPOSAL:

Do not discard tins or pour paint into water couses, use the facilities provided. It it best to allow paints to harden before disposal.

The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at their own risk and we can accept no responsibility for the performance of the product or for any loss or damage (other than death or personal injury resulting from negligence) arising out of such use. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.

 

Sizing Information
Professional Opinion
Product Reviews
Write a review
0 As rated by 0 customers

Write a review for International Boatguard 100 - 2.5 Litre

Your name
Your email address
How would you rate it?
Would you recommend this product?
Let others know your opinion
Submit Review Close
Question(s) answered about International Boatguard 100 - 2.5 Litre
Ask a question
Question(s) asked regarding International Boatguard 100 - 2.5 Litre

Ask a question

Your name
Your email address
Your phone number
Your question
Submit Question  Close
Home Maintenance & Repair International Paint & Varnish